We enjoy hearing from our customers. If you would like to share your experience with others, just e-mail us a short write up along with a picture of your vehicle and we will be proud to display it on this page.

Testimonials

Thanks for everything. It's like having a new car!

- Earl Bullock, Dallas County Clerk

Jim Hadden

Susumu Harper

Doug Roberts

Christina Mason
(Guys take note, I am female)

Doug Boggs

All you folks, who may be reading this site and wondering if this is the way to go, wonder no more. Just buy it, put it in your car, and enjoy the car. Thanks again Bill, for all your help, and your great product.

Kevin Phillips
Snohomish, WA

I bought my wiring kit for my 62 Willys Jeep Pick Up from Hot Rod Wires® in 2004. This was my first wiring job and the way everything was tagged and separated made the wiring job easy for me with no wiring experience. I was even able to get help over the week end. Thanks for a great product and service to back it up.

Kenny Gardner
Guyton, GA

The wiring was a breeze. I used your 12 circuit wiring harness to complete the wiring on my sand rail. The project began with a 1967 VW Beetle donor car. I used your universal turn signal switch, dimmer switch, ignition switch, horn button, and all of the wiring hardware. Everything turned out great and the wiring is rock solid.

Charles Iker
Batavia, OH

I think your product is great - simple and compact.

Bruce Otis
Rochester MN

Bill,

Wanted to write to thank you for the excellent product your company makes. Installation was simple because of the clear instruction manual. The two questions I had were answered quickly – this also being after “normal” business hours on the weekend. The post sales support provided was above and beyond expectation. I am certain to say your competitors can not match your service.

My car is still a work in progress, but just today I hooked up the battery and everything worked perfectly.

I think I spoke directly with you each time I called and I got a clear answer with no extra hassle. This was my first attempt at wiring a car and everything works perfectly.

Again thank you,

Vince Ferrante
Wentzville, MO

Dear Hot Rod Wires®:

I purchased a 24 circuit harness from you. First of all its cost was less than a third of the dash, front and rear harness for a 1979 Corvette. It works great and powered all the bells and whistles GM put on that car.

Your written instructions were great, but more importantly the Tech Support was invaluable. Great product and even better service.

I also used your 18 circuit to rewire my 1941 Ford. Also can't say enough about the harness and tech support.

I will certainly recommend "Hot Rod Wires®" to any of my car friends needing to rewire their customs, Great Job.

Thanks
Randy Hudgins
Gambrills, MD.

Some years ago I set forth on a quest to build myself a Lamborghini replica. To cut a long story short, and believe me there is a lot of advice I could go into about who and what not to buy on this journey I undertook. Nearing the end of my build and receiving my car back from the body guy from hell. I found that the harness was shot, and to my disbelieve no one wanted to tackle the job of replacing the wires; I am far from being an electrician.

Hot Rod Wires® to the rescue. The harness and several other quality products I purchased from them have proven to be a refreshing breath of fresh air. The harness was well built with lots of verbal and printed support from the folks at Hot Rod Wires®. For any one out there that needs to be rewired, I would highly recommend this product.

I knew nothing about wiring a car. It took me three days to put this harness in my car.

Great job
Andrew Middleton
Green Bay, WI

I wanted to thank you for your help and your awesome product. Thanks to you, and a number of late nights, my 85 dodge truck is back on the road and operating better than ever. I appreciate the quick responses you had every time I asked a question. You don't get customer support like that anymore!

Thank You!

Daniel J. Reese
Cuyahoga Falls, OH

When it was suggested to me that a “Hot Rod Wires®” wiring loom would be the best way to deal with wiring a 1960’s French rarity, an Alpine Renault A110, I was very skeptical. My history of vehicle electrics was nil, and I thought this to be beyond my “skill set”, but the very positive response from Bill encouraged me to give this a go, after all if it all turned out too hard I would be able to call on an auto electrician, so I ordered this set.

The package arrived here in New Zealand in a very short space of time, and once I had plucked up the courage to start, progress was rapidly made.

I must have become the “customer we love to hate” but every dumb question was answered with respect and unbelievable speed. My first question was answered with an apology for taking so long, and I sent this email on a Saturday afternoon, 14 hours’ time difference and I had a reply by the time I woke on Sunday morning!

Bill has made this task very satisfying, I have learned new skills, and saved a lot of money too. As for calling on an auto electrician, entirely un-needed. I can not recommend this product highly enough, nor offer the thanks which I feel as there are not words enough to express my gratitude.

Rhys Nolan
New Zealand

Thanks for all you did for me. Bill and Hot Rod Wires® went way beyond and continues to help me solve any problem that comes up well after the sale.

Same day responses and honest accurate information. All problems I have had have been installer error. Nothing wrong with the harness at all. Have used others in the past but now there is only one I will use.

The customer service has been outstanding. Not much more I can say other than buy with certainty of a quality product and company. By the way it is a 1956 Studebaker with an LS1.  

Thanks Again. 
Ken Glowacky
The Woodlands, Texas

Dear Bill;

Just wanted to say thank you so much for stepping up and HELPING our young marine snipers.

Hope to raise about $30,000.00 for the kid's with this 4X4 Rock Crawler.  

Again Thank You.

Frank Ranallo
MARINE CORPS S.O.S.
A non-profit organization created to Show Our Support         

Bill:

Here are some pictures of the Model A Vicky Resto-Rod that I just finished.  I purchased a wiring harness and other items from Hot Rod Wires®, but otherwise modified and installed the wiring for the rod by myself. Your instructions were very clear.  However, I could not have completed the project without your help.

I made many calls to you requesting assistance, and I especially respect your understanding that most of us work on our cars during the evening and weekend hours.  Many of my call were made during those hours, and you were always courteous and got me straightened out.  I recall four calls on a single Saturday morning as you lead me through some trouble shooting.

Your products are simply first class.  I recommend Hot Rod Wires® to any one that wants to do his own work.  You are miles above the other suppliers with glitzy ads. One should consider himself lucky if any of those vendors answers your e-mail or is at all helpful on the telephone.  Hot Rod Wires® is a great resource for our hobby. 

John Nielsen 
Palm Desert, CA

I just finished installing a harness from Hot Rod Wires® in a 62 corvette. I am not into stock parts and I wanted to upgrade the wires. The 12 circuit harness was perfect for this car. One thing I liked was the fuse block stands off the firewall allowing me to route the wires out the sides and top and bottom; this made for a clean install.

The other thing that stands out with Hot Rod Wires® is the support I got from Bill. I don't know how the others are with support but here is a guy who knows how to wire a car.

Thanks Bill,

Clark
Olympia, WA

Bill-

Thanks very much for the tech assistance on the 24 circuit kit that I installed in my 49 Chevy Fleetline upgrade. I am pleased with the attention to workmanship detail and the overall quality of the kit and now enjoy many happy cruises in the Fleetline.

Loren Spohn
Beaverton, OR