Click To Enlarge

Ignition Switch - GM in dash ignition switch coded with 2 keys, retaining nut, terminals and connectors. Switch housing measures 3 1/8” long and 2 5/8” wide. The dash hole size is 7/8”.

This GM switch is not exclusive to GM vehicles; it can be mounted and used for any in dash application for Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Ignition Switch Connector - The correct OEM ignition switch connector for GM in dash ignition switch #IS-332.

Click To Enlarge

Ignition Switch – Smaller Size – GM in dash ignition switch comes complete with 2 keys, retaining nut, the correct GM terminals and connector. Switch housing measures only 2” long and 1 5/16” wide. The dash hole size is 11/16”.

This GM switch is not exclusive to GM vehicles; it can be mounted and used for any in dash application for Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Headlight Switch - GM in dash headlight switch includes retaining nut, rod, knob, terminals and connector. Can be used with rod and knob provided or use your rod or knob for original restoration look of Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Headlight Switch with Billet Knob -GM in dash headlight switch includes retaining nut, terminals and connector. This headlight switch also has an aluminum Billet knob. Can be used with rod and knob provided or use your rod or knob for original restoration look of Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Headlight Switch Rod and Knob Only – Billet Aluminum

Rod with Billet aluminum knob for headlight switch.

Click To Enlarge

Dimmer Switch - GM floor mounted dimmer switch includes terminals and connector. This GM switch is not exclusive to GM vehicles; it can be mounted and used for any floor application for Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Stoplight Switch - Lever Type - This mechanical lever type stoplight switch has a 3” arm and is adjustable. It comes with the hardware for installing the wires.

Click To Enlarge

Stop Light Switch - GM stop light switch includes 2 retaining nuts, terminals and connector. This GM switch is not exclusive to GM vehicles; it can be installed and used for any Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Door Jamb Switch - GM door jamb switch is self tapping and self adjusting; it comes with bullet terminal. This GM switch is not exclusive to GM vehicles; it can be mounted and used for any Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Toggle Switch - This 50 AMP universal type toggle switch has a chrome lever and the terminal connections are on the rear.

Click To Enlarge

Push-Pull Switch - This 15 AMP universal type push-pull switch has a black knob and the terminal connections are on the side.

Click To Enlarge

Wiper Switch - Single Speed – On off switch for single speed wiper system.

Click To Enlarge

Electric Fan Temperature Switch/Sensor - This fixed temperature switch/sensor will automatically turn on your cooling fan at 180 degrees F temperature.

The switch/sensor ensures a consistent operating temperature for your vehicle’s engine.

Click To Enlarge

Turn Signal Switch Small - Basic front and rear turn signal switch. (Turn Signals Only) Kit includes switch, flasher, terminals, connectors, wire and instructions.

Click To Enlarge

Turn Signal Switch - Universal Turn Signal Switch has chrome plated housing & arm and includes an emergency flasher feature. Indicator lights will flash on turn signal switch or in dash. Mounts on flat or rounded surfaces and comes with color coded wiring schematic. This turn signal switch comes complete with 3 prong flasher and in-line fuse. Switch may be used for any 12 volt system.

Click To Enlarge

Master Disconnect Switch - Waterproof, single battery master switch is UL rated. Key is detachable; therefore the switch also serves as an anti-theft device. Max load 500 AMP at 12 volts.

Click To Enlarge

Master Disconnect Boot Insulator – Seals and protects connection. Available in Red or Black.

Click To Enlarge

Accessory Relay - 40 AMP relay may be used for electric fan, electric fuel pump, electric water pump, power windows or power locks. For an application where the switched ignition power will activate the relay. This will take the load off of the ignition switch. Includes 40 AMP relay and relay connector with 12” pigtail.

Click To Enlarge

Horn Button - Stand alone horn button is flush mount. Nickel plated housing with a black plastic button. 12 Volt 5 AMP.

Click To Enlarge

Horn Button - Stand alone horn button with bracket and screws fits up to 1-½” steering column. The ivory button is 1-11/16” diameter.
12 Volt 5 AMP.