Hardware

Click To Enlarge

Accessory Relay - 40 AMP relay may be used for electric fan, electric fuel pump, electric water pump, power windows or power locks. For an application where the switched ignition power will activate the relay. This will take the load off of the ignition switch. Includes 40 AMP relay and relay connector with 12” pigtail.

Click To Enlarge

Electric Fan Temperature Switch/Sensor - This fixed temperature switch/sensor will automatically turn on your cooling fan at 180 degrees F temperature.

The switch/sensor ensures a consistent operating temperature for your vehicle’s engine.

Click To Enlarge

Automotive Fuse Block - Fuse block has a lock together feature that makes it easy to add as many as you need. The small size of this block; which measures 2"H x 1"W with 3 1/4" between mounting holes; makes it ideal for many applications. Each block comes complete with all the necessary terminals. Common or individual feed may be selected.

Click To Enlarge

Engine Ground & Bonding Strap - 8" Braided Copper for body and chassis grounding.

Click To Enlarge

Insulated Stud Junction Block - This stud type junction block has
3/8-16 threads, 7/8 inches long. 250 AMPs.

Click To Enlarge

“Spoon” Style Accelerator Pedal - This cable type spoon style accelerator pedal and arm are chrome plated steel with a 1 ¾” pad. It has nylon bushings and is fully adjustable.

Click To Enlarge

Accelerator Pedal  - This GM cable type accelerator pedal is made of mild steel and is very adaptable. It can be used for Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Accelerator Cable  - This GM accelerator cable is for any carburetor or TBI and not exclusive to GM. It can be used for Chevrolet, Ford, Chrysler, Jeep, etc.

Click To Enlarge

Horn  - OEM Style - 12 volt – Fits any car or truck with multi-position mounting brackets or may be mounted to existing bracket. Die cast, permanently riveted construction.

Click To Enlarge

Horn Relay  - GM - 12 volt - 3 prong for heavy duty use. Will work with any of our universal harnesses (the same one used in our OEM component pack). This horn relay comes with terminals and connectors for any application using a horn contact that grounds to energize the relay.

Click To Enlarge

Horn Button - Stand alone horn button is flush mount. Nickel plated housing with a black plastic button. 12 Volt 5 AMP.

Click To Enlarge

Horn Button - Stand alone horn button with bracket and screws fits up to 1-½” steering column. The ivory button is 1-11/16” diameter.
12 Volt 5 AMP.

Click To Enlarge

Alternator Boot Insulator – Seals and protects connection. Available in Red or Black.

Click To Enlarge

Door Wiring Loom - These door wire looms go between the door and the door jamb; run electrical wires or cables through them. All components are 100% stainless. Stainless steel braided hose is Teflon lined. These door wire protectors are flush mount for tight fit door jamb clearance. They are available for 2 wires or 6 wires.

Click To Enlarge

Billet Wire Looms - These Billet door wire looms go between the door and the door jamb; run electrical wires or cables through them.

All components are 100% Billet and stainless. ½ inch I.D. x ¾ O.D.

Sold in pairs.

Click To Enlarge

6 To 12 Volt Ignition Conversion Kit - This changes your original points type distributor and coil from 6 to 12 volt. Parts included are 12 volt ignition coil, 12 volt ignition condenser and 12 volt ignition ballast resistor. The remaining parts of your ignition system will work on 12 volts.